Kuhlmeyer UKF Edge Bevelling Machine

The Universal Edge Beveller Kuhlmeyer UKF is designed for the high requirements of weld seam preparation without any critical heat influence on the material / edges. The flexible machine concept, with different table sizes, pressure bars and levels of automation, will be specified for customers requirements.

The high-performance belt grinding process meets all requirements of precision bevels and strips, a clean and metallic-blank seam surface and minimal heat influence.

Advantages of the Universal Edge Beveller Kuhlmeyer UKF:

- Savings of approx. 50% – 60% of machining time by higher motor power and material removal rate in comparison to milling lathes or plasma-burning
- Significant less investment and production costs then Milling lathes or plasma cutter
- Hourly rate around 70 € is possible, an average dimension of 80 – 100 m/h of bevel-length can be reached. This leads into a rough number of only 0,70 to 0,80 €/m in costs
- With the state of the art grinding belts (CubitronII) a high removal and lifetime rate by constant quality can be reached. There is only a very low heat influence on the material surface, which grants a highly acceptance for further welding and surface preparation without additional work required
- The grinding belt reaches a speed up to 38 m/s
- Bevel angle from -45° up to +88° in one operation without intermediate handling and setup
- By using the very rigid table surface and movable stop-units the workpieces can be easily and repeatable positioned. The downtime for setup will be reduced to a minimum
- Very good access from the front side
- Controls S7 with OP-Panel is easily and safe to use from Operator
- The UKF allows to grind also pockets on the bevel edges in one operation
- All parameters, like dimensions, speeds, pressure, removal profiles, overlapping etc. are easy to program and setup
- Integrated calculation tool for easy programming: input of bevel angle and depth, length and material is enough to produce a new program
- Quick change of grinding belt within a minute by self-centering of belts
- High reliability of grinding belts by automated oscillation

Technical data / Standard dimension:

- Table sizes with 3m, 6m, 9m, 12m, 15m and 18m
- Motor Power 18,5 kW
- Material removal rate up to 200 cm³/min
- Grinding belt speed up to 38 m/s
- Grinding angle from -45° to +88°
- Forward speed of grinding unit up to 8 m/min
- Machine control PLC make by Simatic S7